About Me

The Complete Guide To Subaru Car Keys
How to Programming a Subaru Key Fob at Home

Based on how recent your Subaru is, you might require having the key fob programmed by a dealer or an automotive locksmith. This is accomplished by connecting a computer machine to your car.

To program your Subaru to program, open the driver's door by pressing the door button and close it. You will hear the chime and see the dome lights flashing in the instrument panel.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you need to be aware of what kind of key fob you have. This can be done by studying the key fob's shape or by listening to the car for a chime.

Once you have these details, you are able to start the process of programming your key fob at home. You'll require a flathead and a metal key to complete this. Open the key fob by twisting it. Then push the key into the case and then release the battery from the small tabs that secure it. Replace the battery and put the case back together.

Step 2: Disconnect the key fob case

Change the battery is a good idea since it can revive key fobs that aren't working for a while. However, there are some situations where the buttons on the key fob may be damaged. If you see that the metal contacts of the button have become loose, try soldering them in place again in order to make them function properly.

Before you start the process, ensure that your vehicle's doors are closed and your ignition is off. Close the door on the driver's side and then press the button 10 times in rapid succession. Then, you'll hear the instrument panel chime and your dome lights will flash. This indicates that you're ready to move forward.

Step 3: Insert the key fob into the ignition

There are lots of articles on the internet that will show you instructions on how to program a new or replacement Subaru key fob at home, however they are not precise. A professional locksmith or auto dealer in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. Use the door button to open all doors. Open and close the driver’s door a second time. Then, insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will sound a chirp when the settings are altered.

Step 4: Turn the ignition On.

Before proceeding with this method of key fob programming it is important to keep in mind that this process only works when you have a working key already. If not you can find an auto-locksmith or dealer who will need to program the key for your Subaru Fort Bliss.

Once the key is programmed, it should be capable of starting your vehicle in about 5 minutes. Begin by closing all doors, then turning off the engine. Next, sit in the driver's chair and unlock all doors using the door button control. Place the key into the ignition then turn it on to the first position (the electrical systems will turn on, but the engine remains off) then turn it back to the off position ten times in rapid succession.

Step 5: Unlock the Driver's Door

Subaru offers a variety of high-end automobiles equipped with key fobs that lock and unlock doors, start the engine, and even defrost windows. However, sometimes these gadgets aren't working as they should.

To fix this problem to resolve the issue, you should call an auto locksmith or dealer. This will solve the issue and ensure that your vehicle is secure.

To do this, open the driver's doors and close it. Place subaru car key replacement into the ignition and then turn it back to position 1. Then, turn it back to the off position. Repeat this ten times in one row as fast as you can. After the tenth time you will hear a sound.

Step 6 Step 6: Press the Lock/Unlock key on the Driver's Door

If you are looking to replace the battery inside a Subaru key fob, the process is simple. Remove the fob's exterior case. Then you can use an flathead screwdriver, to pry open the inside of the case and then remove the battery.

After removing the battery then replace it with a new one. Close the case. Sit in the driver's chair and open all doors using the door button control. Finally, insert the key in the ignition and turn it to ensure that the electrical systems are powered on but the engine is off. Repeat this 10 times until you hear a chime from the instrument panel. This will put the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button

The annoying chirp that can be heard when you lock or unlock the Subaru Key Fob from outside of the vehicle can be very distracting for certain owners. In some cases, you can disable the chirp by closing and opening all doors by double-clicking on the lock button on the key fob.

Switch off the ignition and shut all the doors as well as the lid of the fuel-filler. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a chime after this is accomplished. The chime signals that the fuel-filler lid and door are locked. The setting can also be altered so that the lids and doors are locked automatically, without pressing the request switch.

Step 8: Enter your 8-digit Transmitter Number

Note down the initial series of 8 digits and keep it handy. Now, climb into your driver's chair, close all doors and then turn the key back to the first position (towards towards). After 10 turns, the instrument panel should chime for a single time.

Next, open the key fob case and find the circuit board that controls the transmitter. There should be one or two sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. For older models, this procedure may require a visit to the dealer.