About Me

20 Door Handle Replacement Websites Taking The Internet By Storm
Door Handle Replacement

It's worth it to replace door handles if you don't like the way they appear, or if they're difficult to use. With some patience, you can get an entirely new handle in a short time.

Modern door handles are equipped with cover plates that conceal the screws to give them a beautiful appearance. However, you'll have to attach them separately if the new handle doesn't have them attached already.

Remove the handle that was previously used

The door handle is not only a decorative addition to your home It's also a safety feature that allows you to lock and unlock your door. However, as time passes your door handle can lose its grip, feel loose, or appear old and worn. This is an indication that it's time to replace it.

One of the first indications that your door handle needs replacing is if it's becoming difficult to operate. This is a problem because it means that you can no longer lock or unlock your door, which could pose an security risk to you and your family.

It is also an excellent idea to replace your door handle in the event that it's damaged or broken. A damaged or broken door handle can be dangerous, especially for elderly and children members who struggle to open it. They may get trapped. Fortunately, it's fairly easy to fix a broken door handle by replacing the handle that was broken.

Most modern door handles are a standard size, so they should fit any door. If you're not sure whether the new door handle you're buying will fit, try removing the old one and measuring its housing holes. This will help you purchase the right size door handle.

It is the easiest way to remove the old door handle by removing it from the door. Usually it is a matter of using a screwdriver. Some door handles come with a cover plate which hides the screws used to mount them. You'll need to remove the cover plate to gain access to the screws. After you have removed the old handle, make a note of the way the spindle is attached. This will aid in aligning the new handle.

Alternatively, you can remove the door handle by uncrewing it from the latch mechanism. This is typically done with a screwdriver but you'll need to find the small latch, which should be at the edge of the trim piece. After removing the latch, unscrew the handle and strike plate. Then, you can remove the latch from the edge of the door.

Removal of the Strike Plate

You'll have to replace your latch plate when replacing the handle. It's the part that holds the hole where the door's latch hooks in when the door is closed. The new handles will come with two latch plates that are circular and rectangular plate (see the diagram above that shows the parts of the door handle). If your current latch plate is rectangular, swap it out for the circular one so that the latch hooks into the strike plate in a manner that makes the handle easier to operate.

The first step is to remove the screw that is holding the old latch plate. The screws are usually quite tight and require a lot of force to loosen them. It is helpful to have a second person assist with this part if possible.

After the screws have been removed, the latch plate should slide out of the door easily. If it is stuck or doesn't move using a nail file to scrape around the edges of the latch plate. This can sometimes open the plate up.

Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that came with your new handles. Be cautious not to tighten too much the screws, as this may cause damage to the strike plate.

If you're unsure whether the latch plate is in the correct position, shut and then open the door to determine whether it latches and closes properly. If it doesn't, you will need to adjust the strikeplate up or down, or forward or back until the door locks correctly.

If the door is moving or jiggling, then you may need to increase the size of the hole for the latch in the strike plate. This is more frequent on older doors. It can be caused by wear and tear, hinges that are too narrow, the wrong size latch or damaged strike plate. If this is the case, follow the same procedure for adjusting the strike plate, but with an iron file instead of an hammer and chisel.

Removal of the Latch

The latch is a curved metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also catches an opening in the door's frame so that the door remains closed. If your door shakes when you close it, replacing the latch could be the only thing needed to fix the problem.

The screws that hold the door latch are difficult to locate, but you can usually put a screwdriver in an insignificant hole on the trim plate and pry the latch off. Once you've removed the trim plate, it'll be simple to take off the latch as well as the remaining bolts that hold the spindle and latch in place.

If the latch isn't easily removed, use a paperclip or tool to take it off the handle mechanism. Place the item into the recessed latch slot and then gently twist or jiggle until you feel that the latch and handle begin to split. You may have to do this several times before the latch comes loose enough to allow it to be pulled out.

It should be possible to slide the new latch into its slot without any issues once you have removed the old one. Make sure that the latch is correctly positioned in the slot and aligned with the screw chambers and then use your new screws to fasten it to the strike plate and door frame.

Before you install the new handle, make certain to measure your existing backset (the distance from the centre of the large hole on the front surface of the door to the edge). Also, ensure whether the size of the latch on the new handle matches the measurement of your existing handle.

If you're replacing the handle or latch or handle, or if your previous lock cylinder is damaged then you'll require an entirely new one. If you're not changing the locks, the new latch should fit in the existing recess and work with the keys you have currently. Choose a latch that has rectangular cover plates to match your old handles.

Removing the Cover Plate

Door handles can start to look shabby with time However, if you replace them with a contemporary lever-on-rose designs, it's a quick and easy DIY project and decorating idea that will improve the overall look of your home. You can buy complete sets that come with matching escutcheons as well as privacy adaptor kits.

To replace an internal door handle remove the cover plate (or rose) that protects the screws and the inner mechanism. Use a flathead for removing the plate. It may have a slot on one edge or be secured by pins.

After the cover plate is off take off the screw that holds the interior handle in place, and then set it aside. You'll also need to remove the screws that are holding the latch and inner plates to the door, which you can accomplish by loosening them using a Philips screwdriver. Remove the inner plates and latch from the door. Place them aside.

Most doors have an opening between the jamb of the door and the inner edge of the frame that makes room for a handle, but not all have. If yours isn't allow for a handle, you'll have to make a hole in the door. This is the same process as opening a locked door however, you'll have to be extra cautious not to damage the door's frame or frame.

After the holes are drilled after which you'll have to put in new door knob screws. Buy the same dimensions as your old screws to ensure that you don't get a handle too tight or loose. Installing a new strike rod and latch is also necessary. They aren't included in the majority of door handle sets.

If you're looking for a high-quality replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received hundreds of 5-star reviews from happy customers. It's a great option for replacing worn out or damaged door hardware on your Chevy.