About Me

The Best Saab 9-3 Key Replacement Gurus Are Doing Three Things
How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of specific steps to add an additional ignition key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then a new car key and transponder have to be purchased and programmed to the car.

It is recommended to rotate your keys in order that one does not wear out more quickly than the other. This will keep your keys in pristine condition.

Replacement Case

The new key fobs aren't like the older Saab keys. They are equipped with electronics that make them difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. But, it has also made replacing lost keys a comparatively expensive undertaking.

Every owner of a Saab 9-3 should have at least two functioning keys. If one is lost, it is expensive to purchase a new one for the car since it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to cut down on these high costs. Certain parts suppliers will utilize the code of a spare key to cut a new metal blade for less than that of a dealer. The key, however, must be identical to the original one to function properly within your car.

Follow these steps to replace the case. You'll require an open-faced screwdriver and a lot of patience. Using the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once the case is opened, take out the electronics and place them into your new case. Make sure saab key code insert the correct key and badge back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This YouTube DIY video Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in just four steps. This guide should work with any modern saab-type key fob, although the process might differ slightly.

The button is typically located next to the Saab logo on the back of the fob. This button is usually located on the back of the fob, right next to the Saab Logo. Then, use a flathead screwdriver to insert into the small hole in this button. This will allow you to open the fob's case so that you can replace the battery.

After you have installed the battery CR1632, you are able to reassemble the remote key fob. You can then program it into your car. The whole process should not exceed an hour. This is a simple process that doesn't require any special tools.

If you lose your key, the process is more complicated but it is still able to be accomplished. The dealer will need to verify the VIN of the car, and then order a replacement key blade and TWICE module, both with the proper unique code. After that, they'll need to cut the replacement key and then program it using a brand new tool for programming called MDI.

Key Replacement Fob

The key fob is the piece that locks and unlocks your car, it's got a battery inside. Batteries have a limited lifespan and will eventually die. This is a frequent issue in all vehicles. The good news is that you can replace the battery on most key fobs without having to replace the entire case. You can purchase fobs replacements on Amazon that come with all the electronic components already in place, so you'll simply open the case and replace the batteries that were in the case. It is necessary to remove the emergency key before you can replace the batteries. To do this, insert an small screwdriver with a flat head into the slot in the middle of the. The case will split as you turn the screwdriver around it.

If you're about to replace the keys, ensure that you have spare keys, as this can reduce the total cost by a significant amount. If you have spare keys, you can have the dealer cut a new key and program it to your car, which is much cheaper than replacing the entire key fob.

It is possible to add another key to your car If you don't already have one, however it requires an extensive amount of research and effort. The cost of adding a second key is around a hundred dollars and also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

The current SAAB 9-3 uses an advanced alarm system based on a key code. If you lose your only key, it could be costly to purchase a new one because the car must have a special computer added and be programmed to accept a brand new key. Most locksmiths can't do this, and even dealers will charge hundred dollars to program the new key!

Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your sole working key. Instead we can reprogramme the EEPROM on your existing car computer to prepare it to accept a second key, and save you over 50% of the amount you have to pay at a dealership.

If you've owned a SAAB 9-3 an extended period of time you are aware that the ignition keys aren't very durable. If the ignition key you have isn't working properly, you should consider replacing it. They can become very sticky and the buttons are known to fall off. It's not so difficult as it may seem to replace the ignition key. With the proper tools, it can be done quickly.