About Me

7 Simple Tricks To Moving Your Subaru Car Keys Replacement
Replacing a Subaru Car Key With an Unresponsive Button

If you have an Subaru car key that has an unresponsive button, it may be time to replace the battery. Capitol Subaru's Service Department can help you with this simple procedure.

Open the key fob and locate the circuit board. Look for two sets of numbers with 8 digits and note the first one on a piece paper to reference later.

Keyless entry

With the keyless entry system, you can open the doors and trunk of your Subaru without an actual key. Utilizing a radio signal the car's computer can detect the presence of keys within a certain distance, and send an alarm to unlock your doors or open your trunk. You can also start or turn off the engine using this system. Certain advanced systems also offer remote starting, smartphone connectivity and alarms.

A reputable locksmith will be able to create a replacement Subaru key fob in case you have lost yours. They can also make high-security keys that are difficult to duplicate and laser-cut keys that are more complex and require special equipment to produce. They can help you select the right key for your vehicle and even install it for you.

To program a brand new Subaru key fob, first determine what kind of key you have. Then, you can open the fob's casing and examine the circuit board for the transmitter. You will see one or two numbers with 8 digits. Write down the number, and then close the fob case. You'll hear a chime and see the dome lights flash.

Transponder key

If you own a Subaru that features keyless entry, you must know how to change the battery in the key fob. You can use a screwdriver with a flat head to remove the case of your key fob and remove the battery that was in there. Then, you can replace it with a new one. Make sure that you place the new battery inside the case with the correct side facing upwards.

When it is activated with a transponder, a key (a combination of the words transmitter & responder) includes a microchip that communicates with the ECU of your vehicle. The chip is equipped with an unique serial number for your vehicle. It is also a security measure that prevents key duplication.

A locksmith can program your transponder keys, but you should visit an automotive locksmith that has the right equipment and expertise. If you do it wrong, you could damage the transponder chips inside your car keys which could cost you money in repairs. To program a key, you must open and close the door to the driver and then turn the car's ignition off and back on. Repeat the procedure 10 times. You'll hear a chime from the instrument panel after ten repetitions.

Keys with a side-cut

Many vehicles come with side cut keys, which are also known as laser-cut keys. These keys are more secure than traditional car keys. The edges of the keys are shaped in a way that matches the profile of the lock tumblers. This kind of key requires a specialized machine to duplicate.

To program a Subaru Key Fob, locate the circuitry for transmitters inside your key fob. (Instructions are typically found in the owner's manual). Then, search for one or two sets of numbers (8-digits) on the board. Note these numbers down to keep them in your pocket. Close your doors and get into the driver’s seat. Then, place replace subaru key fob in the ignition and switch it to the first position. After 10 seconds the car will begin to unlock and start.

It is easy to replace the battery on your Subaru key fob when you have a new fob. Find a small nook in the seam between the front and back of the fob's enclosure. Use a small screwdriver to pry the closed encasement, then remove the smaller unit inside. Replace the battery with a brand new CR 2025, and ensure that it is inserted correctly.

Last-cut key

These keys are more practical than traditional keys since they can open the doors of your car from a distance of several yards. The fobs can also be used to start the car. The latest models of keys come with an internal carbon chip that emits an electronic signal. This adds another layer of security that makes your Subaru more difficult to take.

However, some drivers prefer to have an older key as backup. If your key fob isn't functioning, you may need to replace the battery. If this doesn't work you must visit Hanson Subaru or another trusted locksmith for assistance.

If your Subaru is a model that is late and has an engraved key. This key is similar to Honda's high-security HO01 as well as the HO03. This type of key has four tracks and is externally cut. It can be duplicated with standard tools found at locksmiths and hardware stores, however, it does not come with onboard programming. This type of key is available at the majority of dealerships. However, it will cost you more than an edge-cut version.

Key code

Subaru key fobs come with a security microchip which can be used to lock or unlock your vehicle. When you insert the key in the ignition the signal is sent to a receiver that is located on the dashboard. This signal is specific to the key and if it is not recognized and the engine does not start. If your key fob does not function, it might be time to replace the battery.

Find the eight-digit code on your vehicle prior program a Subaru key. The code can be found on the original ringtag or on Subarunet. Once you have the code, open and shut your driver's door, and then press the lock button a number of times equal to each digit in the code.

Then then, insert the new ignition key and switch it on. Don't start the engine. When the key fob begins working the security light should cease to flash. If the security light continues to glow it is possible to replace the battery. You can also contact a locksmith for help.